DP02 SP2014 Week11

Assignment 10.0

Create Vacuum form model for your halftone model

Assignment 10.1

Create a model (12″x12″x12″ max) using mixed methodology

Parts Axonometric

AK47rifleexplodedview-e1276050183717

Parts Axo Slide

download lamp model

  1. Make a copy of the lamp object, and hide one
  2. Setup a parallel view(axonometric)
  3. Separate parts, so that parts are not overlapping in axonometric view
  4. Show original lamp
  5. Make 2D
  6. Copy 2D curves
  7. Trim everything but most outer line
  8. Separate them into 2 layers
  9. Export selected as Illustrator file
  10. In Illustrator, change lineweights and scale

Plan drawing workflow

MAXXI Museum  By Zaha Hadid Architects-Photographs Iwan Baan-20

download 2d drawing template here

Plan drawing examples

  1. Set up a clipping plane 4′(or anywhere appropriate) above the floor line
  2. Make sure the clipping plane is set for the top view
  3. Import 2d drawing template
  4. Run “make2d” command – set “visible clipping plane” to 0.5mm, set “visible lines” to 0.13mm
  5. Change lineweights for the rest of lines
  6. For cut line, use “hatch command” to shade inside
  7. Print as pdf at scale.
  8. In Illustrator, you can select lines by >Select>same>stroke weight to adjust things.

Lab Session

Assignment 11.0

1 Plan drawing to scale printed on 11×17″

Assignment 11.1

Exploded part axonometric of your project

Final Deliverable for DP02

Approximately 12x12x12″ digitally fabricated model of an instance of your project.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s